| Material Type |
SS PCB |
DS PTH |
MULTILAYER PCB |
| Laminate Used |
- FR-1, FR-4, CEM-1, CEM-3,
- Nan Ya, Panasonic, ShengYi
- Normal Tg 135 Material
- High CTI Laminate Available(Tg 150~180)
- Halogen Free Laminate
|
- CEM-3, FR-4
- Normal Tg 135 Material
- Nan Ya, ShengYi, Panasonic
- High CTI Laminate Available(Tg 150~180)
- High TG Performance Laminate
- Halogen Free Laminate
|
- CEM-3,FR-4
- Normal Tg 135 Material
- Nan Ya, ShengYi, Panasonic, Ventec
- High CTI Laminate Available(Tg 150~180)
- High TG Performance Laminate
- Halogen Free Laminate
|
| Overall/Finished Thickness |
|
|
- 0.8mm to 2.5mm , Max. 8 Layer
|
| Copper Thickness |
- 17.5µm, 35µm, 70µm, 105µm
(0.5 oz, 1 oz, 2 oz , 3 oz)
|
- 17.5µm, 35µm, 70µm, 105µm
(0.5 oz, 1 oz, 2 oz , 3 oz)
|
- 17.5µm, 35µm, 70µm, 105µm
- ½ oz, 1 oz, 2 oz, 3 oz
|
| Safety Requirement |
- UL No. E 116916
- 94-VO Certified
|
- UL No. E 116916
- 94-VO Certified
|
- UL No. E 116916
- 94-VO Certified
|
| Pattern Image |
- Line / Spacing 0.15mm / 0.15mm
|
- Line / Spacing 0.125mm / 0.125mm
|
- Line / Spacing 0.125mm / 0.125mm
|
| Solder Mask |
- UV, PISR Upon Request
- Tamura/Electra/Taiyo
- Green,Blue,Black,White,Red
|
- PISR
- Min. opening 0.10mm
- Taiyo, Tamura, Electra
- Green, Blue, Black,white,Red
|
- PISR
- Min. opening 0.10mm
- Taiyo, Tamura,Electra
- Green, Blue, Black,white, Red
|
| Legend |
- UV and Oven Cure
- Min. Feather Width 0.18mm
- White, Black, Yellow
|
- UV and Oven Cure
- Min. Feather Width 0.18mm
- Black, White, Yellow
|
- UV and Oven Cure
- Min. Feather Width 0.18mm
- Black, White, Yellow
|
| Product Identification |
- Week Code Printed On Legend
- Week Code on Soldermask
- Week Code on Copper Layer
|
- Week Code Printed On Legend
- Week Code on Soldermask
- Week Code on Copper Layer
|
- Week Code Printed On Legend
- Week Code on Soldermask
- Week Code on Copper Layer
|
| Carbon Key / Jumper |
- Line/Spacing 0.40mm/0.40mm
- Carbon Resistivity 40 Ohm/Square/15µm
|
- Line/Spacing 0.40mm/0.40mm
- Carbon Resistivity 40 Ohm/Square/15µm
|
- Line/Spacing 0.40mm/0.40mm
- Carbon Resistivity 40 Ohm/Square/15µm
|
| Peelablemask |
- Maximum Tenting hole size 2.80mm
|
- Maximum Tenting hole size 2.80mm
|
- Maximum Tenting hole size 2.80mm
|
| Fabrication |
- Minimum Hole Size For NC Drill 0.25mm, for Punch 0.60mm
- Minimum Punch Soft Tool Shelf Life 200k
- Minimum Punch Harden Tool Shelf Life 150k
- V-Cut is Process
- CNC Routing Process
|
- Minimum Hole Size For NC Drill 0.25mm
- Minimum Punch Harden Tool Shelf Life 150k
- V-Cut is Process
- CNC Routing Process
|
- Minimum Hole Size For NC Drill 0.25mm
- V-Cut is Process
- CNC Routing Process
|
| Surface Finishing |
- ENIG
- OSP Coating
- HAL
- HALF
- Immersion Silver
- Immersion Tin
- As per customer specification
|
- ENIG
- OSP Coating
- HAL
- HALF
- As per customer specification
|
- ENIG
- OSP Coating
- HAL
- HALF
- Immersion silver
- Immersion Tin
- As per customer specification
|
| Products Acceptance Criteria |
- Follow IPC-A-600 Acceptance Criteria
|
- Follow IPC-A-600 Acceptance Criteria
|
- Follow IPC-A-600 Acceptance Criteria
|
